Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-8X0,8
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 8 mm |
Suitable for groove diameter | 7.6 mm |
Internal diameter (d1) | 7.4 mm |
Eye width (a1) | 3.2 mm |
Width (b1) | 1.5 mm |
Thickness (s1) | 0.8 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Cut protection glove
PRO compartment divider set
Work poloshirt
A 402 door handle
Cetus trousers with holster pockets
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Rubber modules, small
Designer furniture handle oval
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated