Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-9X1,0
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 9 mm |
Suitable for groove diameter | 8.6 mm |
Internal diameter (d1) | 8.4 mm |
Eye width (a1) | 3.3 mm |
Width (b1) | 1.7 mm |
Thickness (s1) | 1 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Countersunk head screw with hexagon socket ISO 10642, steel 12.9, plain
Lock washer type S A2 stainless steel
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive
Fully threaded hexagonal bolt and fine thread
Work dungarees
Adhesive STAMCOLL N55 For bonding Stamisol overlaps and connecting to roofs and façades
HSCo Multi Longlife machine tap for through holes DIN 371/376
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment