Circlip for bore holes, standard version, shape J DIN 472
DIN 472 spring steel phosph. and oiled J collated
CRCLIP-BRE-DIN472-J-MG-19X1
Register now and access more than 125,000 products
Datasheets(X)
 | |
Suitable for holes | 19 mm |
Suitable for groove diameter | 20 mm |
Internal diameter (d2) | 19 mm |
Outer diameter (d1) | 20.5 mm |
Eye width (a1) | 4.1 mm |
Width (b1) | 2.2 mm |
Thickness (s1) | 1 mm |
Standards | DIN 472 |
Material | Spring steel |
Surface | Plain |
Design | In magazine |
Form | J |
RoHS-compliant | Yes |
Last viewed
Diamond cutting disc Klingspor DT 600 U Supra
Low-cut safety shoes, S3
Wire cable barrel terminal with right-handed thread
Solid carbide end mill DIN 6527L, long, sharp-edged, quad blade with reinforced shank
Work shirt ESD T-shirt plain
MFD-S multi-purpose drill bit with straight shank
Hexagonal bolt with shank and fine thread DIN 960, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)
Work dungarees
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Square wedge-shaped washer DIN 6917, 295-350 HV, hot-dip galvanised, wedge-shaped, for high-tensile prestressed bolt on I-profile