Circlip pliers, shape A for shaft circlips
DIN 5254 shape A shaft circlip
CRCLIPPLRS-A-(40-100MM)
Register now and access more than 125,000 products
Standard: DIN 5254
Handle: Plastic-coated
Guarantees a secure grip, prevents slippage
Tip from compressed spring steel
Optimised stability, even with seized rings.
Inserted tips
Offers maximum strength when loosening seized rings and allows rings to be installed with minimal distortion.
Screwed and mounted joint
High precision and optimised movement.
Large locating faces
Rings mounted without torsion.
Pliers head
Narrow design for optimum access to workpiece, including in hard-to-reach spots.
Internal spring
- Inside screwed joint for protection
- Does not obstruct work
- Cannot be soiled or lost
Circlip pliers for outer rings (shafts).
 | |
Length (L1) | 225 mm |
Min./max. grip range | 40-100 mm |
Jaws length (L2) | 70 mm |
Material | Steel |
Diameter of tenon (D1) | 2.25 mm |
Form | A |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Pan head tapping screw, shape C with Z recessed head DIN 7981, A2 stainless steel, plain, PZ drive, shape C
EPS profile thumbturn cylinder
Multi-function shelf
Washer for bolts
Cable ties with metal latch closure – industrial quality
Wood screw Hexagon head DIN 571, A4 stainless steel
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers
EPS profile thumbturn cylinder
S3 high-cut safety boot Base B0177
Countersunk tapping screw, shape C with Z recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
