Circlip, shaft DIN 471, bronze CuSn6, plain, standard design
DIN 471 bronze CuSn6 plain standard version
CRCLIP-SHFT-DIN471-A-CUSN6-20X1,2
Register now and access more than 125,000 products
Datasheets(X)
 | |
Suitable for shafts | 20 mm |
Suitable for groove diameter | 19 mm |
Internal diameter (d1) | 18.5 mm |
Outer diameter (d1) | 28.4 mm |
Eye width (a1) | 4 mm |
Width (b1) | 2.6 mm |
Thickness (s1) | 1.2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Copper-tin |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
1/2 inch impact socket wrench set inch hexagon Short, 11 pieces
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Pre-insulated inch copper pipe Double pipe certified in accordance with DIN EN 12735-1
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
EN1254 copper 5130R
Raised contersunk head tapping screw, shape C with slot DIN 7973, A2 stainless steel, plain