Circlips for shaft, shape A
DIN 471 steel zinc flake, standard version
CRCLIP-SHFT-DIN471-A-FLZNNC480H-37X1,75
Register now and access more than 125,000 products
Datasheets(X)
 | |
Suitable for shafts | 37 mm |
Suitable for groove diameter | 35 mm |
Internal diameter (d1) | 34.2 mm |
Eye width (a1) | 5.7 mm |
Width (b1) | 4.1 mm |
Thickness (s1) | 1.75 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Flake zinc |
RoHS-compliant | Yes |
Corrosion protection period/conditions | 480 h / in accordance with DIN EN ISO 9227 |
Last viewed
ATO resettable fuse For continuous operation (permanent installation) and fault finding (diagnostics)
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Stretch X softshell jacket
Clutch tool set Ford DPS6/6DCT250 27 pieces
CFS3100 finger scanner with Bluetooth technology
Welder clothing
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Long-life & speed diamond wet core bit 1 1/4 inch
90° angled male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread