Clamp washer
Clamping washer
WSH-CLMP-F.FTSCR-(MZN)-M8
Register now and access more than 125,000 products
Material: Mechanically galvanised steel
Captive screw fastener in conjunction with a full thread screw
- Minimal machining required, no special tool necessary
- Thanks to the clamp ring's slim design, it can even be retrofitted in many structures, without having to make any structural changes
The serrated side of the washer must point in the direction of the nut thread. Clamp washers must not be reused once the bolt has been removed.
The user must check all specifications for applicability to the current application.
Datasheets(X)
CAD data (available after login)
General engineering
Toys
Motor vehicles
Trolleys
Electrical equipment
Assembly:
- 1. Create the bore hole (bore hole diameter = nominal diameter of washer + max. 1 mm) or the oblong hole
- 2. Push bolt through the bore hole
- 3. Slide the clamp washer over the thread
 | |
Suitable for screw thread | M8 |
Nominal diameter (d1) | 8 mm |
Outer diameter (d2) | 16 mm |
Thickness (h1) | 2.2 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Area of application | Machinery directive fulfillment |
Removal force | 445 N |
Assembly force | 156 N |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Tab locking plate For flush-closing doors
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
System insert 8.4.1, combination wrench
System case 4.4.1
Washer DIN 1441, steel, plain, for bolt, product grade C
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Akura 44 profile thumbturn cylinder
Plus Quadro-L Vario hammer drill bit