Clamp with fastening lugs DIN 3017-2, shape B1, W1, BASIC-Line
DIN 3017-2 shape B1 W1 BASIC-Line
CLMP-FSTNGLUG-DIN3017-B1-W1-W9MM-D19MM
W.TEC
Register now and access more than 125,000 products
Datasheets(X)
Material | Steel |
Surface | Zinc plated |
Width of band | 9 mm |
Nominal diameter | 19 mm |
Min./max. grip range | 18-20 mm |
Drive type | Slot |
Width across flats | 0 - not applicable |
Tightening torque | 1.5 Nm |
Standards | DIN 3017-2 |
RoHS-compliant | Yes |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
ASSY® 4 CSMP universal screw collated Steel zinc plated partial thread countersunk milling pocket head
Tallinn 3-in-1 parka
Heat-shrink crimp ring connector
Radial shaft seal FKM shape AS
Sanding disc, hook-and-loop fabric VSM XK870K
Pull handle ST/A340
AL 900 door handle on outer plate With CK punch
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-plated, transparent passivated (A3K)
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled