Clamping lever with male thread
Clamping lever, steel, male thread, slim
CLMPLEVR-ET-ST-M6X26,5X20
Register now and access more than 125,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into the place automatically.
 | |
Material of handle | PA reinforced - Polyamide reinforced |
Material of screwing thread | Steel |
Surface of the screwing thread | Zinc plated |
RoHS-compliant | Yes |
Design | Slender |
Thread type x nominal diameter (d1) | M6 |
Shank diameter (d2) | 12 mm |
Head diameter (dk) | 16 mm |
Length of lever (l1) | 50 mm |
Thread length (lg) | 20 mm |
Height (h1) | 34.9 mm |
Head height (k) | 26.5 mm |
Radius (r1) | 42 mm |
Colour | Black |
Product weight (per item) | 13.000 g |
Thread type | Metric thread |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
3/8 inch socket wrench insert metric, hexagon, short
Spacer washer
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Standard cable tie with plastic latch
Screw cylinder head, assortment 960 pieces in system case 4.4.1. ISO 4762
Low-cut safety shoes S1 ESD
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Stud with threaded end ≈ 1 d
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)