Clamping lever with male thread
Clamping lever, steel, male thread, slim
CLMPLEVR-ET-ST-M8X36X30
Register now and access more than 125,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into the place automatically.
 | |
Material of handle | PA reinforced - Polyamide reinforced |
Material of screwing thread | Steel |
Surface of the screwing thread | Zinc plated |
RoHS-compliant | Yes |
Design | Slender |
Thread type x nominal diameter (d1) | M8 |
Shank diameter (d2) | 15 mm |
Head diameter (dk) | 20 mm |
Length of lever (l1) | 75 mm |
Thread length (lg) | 30 mm |
Height (h1) | 49.7 mm |
Head height (k) | 36 mm |
Radius (r1) | 65 mm |
Colour | Black |
Product weight (per item) | 31.600 g |
Thread type | Metric thread |
Last viewed
Handle plate on outer plate
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Washer with round hole Mainly for wood construction, DIN 440, A2 stainless steel
TIPP® Smartlock GS pipe clamp
Shoe accessories
Bonded seal, self-centring, assortment
Slotted countersunk head screw DIN 963, steel 8.8, zinc-plated, blue passivated (A2K)
Rectangular screw-on bar With integrated tilt adjustment for the front
Tongue for hygienic design sash lock Plain A2 stainless steel 1.4301
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank