Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-10X30
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 10 mm |
Length (l1) | 30 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Split pin ISO 1234 A2 stainless steel
Hydraulic crimping tool, WHK 60/22 For half-shell crimping inserts, width 22 mm
Hammer drill bit Max Quadro-L Vario
Roofing screw EUROFAST® Program
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Multi-purpose grease I
Potato hoe With 1,300 mm ash handle, spring socket and four hardened tines
TIPP® robust pipe clamp, hot-dip galvanised
Acrylic sealant