Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-10X55
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 10 mm |
Length (l1) | 55 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Contact tip For steel wire
Shaft protection GPN 290 Polyethylene (PE-LD), yellow
Conical countersink HSS Ruko plain form C 90°
1/2 inch impact socket wrench insert hexagon, metric, short
Support shim
Drawer divider set, BASIC RW, 16 compartments
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Fine Sanding Roller
Threaded sleeve for steel-armoured pipe Stapa-Gewinde-WESV