Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-12X22
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 12 mm |
Length (l1) | 22 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Tolerance class | 0 - not applicable |
Last viewed
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Exoskeleton accessories Aluminium rail
Charger 12 volt AL 30-LI For rechargeable battery LI 10.8 volt and 12 volt
Pan Head screw with hexalobular head ISO 14583, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
VLB 60 3D IHV door hinge
Cylindrical pin, hardened DIN 6325, steel, plain
Hexagon nut, high profile with clamping piece (non-metal insert), imperial
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Divider set, flat for workshop trolleys in system dimension 8.4