Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-12X50
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 12 mm |
Length (l1) | 50 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Tolerance class | 0 - not applicable |
Last viewed
Counterbore assortment/set Ruko counterbore set DIN 373 HSS BLK, quality grade: fine for through holes, 6 pcs.
Double cylinder S5 locking system
Protective sleeves GPN 200, shape A Polyethylene (PE-LD), natural
STARLINE® work vest
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Low-cut safety shoes, S2
Low-cut safety shoes, S3
Order protector with rip-tape fastening
Raised countersunk head screw with recessed head, H ISO 7047, A2-70 stainless steel, plain
Low-cut safety shoes, S3