Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-16X80
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 16 mm |
Length (l1) | 80 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Low-cut safety shoes S3
Twist drill DIN 340 HSS type RN
Multi-purpose grease construction/agriculture
T-piece, reduced with solder connection EN1254, copper, 5130R
System workshop trolley Pro 8.4, equipped
Divider assortment With compartment rails and compartment dividers for system dimensions 16.6
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 1897 type RN
Work pullover
Eye bolt with full thread DIN 444, steel 8.8, zinc-plated, blue passivated (A2K), shape LB