Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-20X60
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 20 mm |
Length (l1) | 60 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
HSCo8 AlCrN annular cutter
Connection piece, 1-way For Elmo® AP damp-room switch series
Multifit nitrile Economy protective glove
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Intermediate layer for ISO C clamping system
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
EPS profile double cylinder
Slotted countersunk head screw DIN 963, brass, nickel-plated (E2J)
Core drill DS 180-P