Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-21X18
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 21 mm |
Length (l1) | 18 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Slotted countersunk head screw DIN 963, A4 stainless steel, plain
Hole saw Ruko tungsten carbide multigrade hole saw
Replacement spray head Variator for RAPID 2-component primer filler
OrgaAer central lock For hanging frames and wide drawers
LED light strip FLB-12-13 Stick-on
16° circular collated nail With ring-shaped shank
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Contact spray SW
Work trousers
T-piece branch pipe, reduced EN10242 B1, hot-dip galvanised malleable iron