Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-2,5X8
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2.5 mm |
Length (l1) | 8 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Self-tapping thread insert with cutting slot
Weatherproof trousers
Double rabbet plane With dual cutting iron
Steel nail with riveted washer and discontinuous longitudinal corrugation
Flat washer, turned for steel construction
Hexagonal bolt
Flat scraper Martor Scrapex Inox 592
Flat cover cap, for hexalobular socket and AW drive
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
Strip for number plate holder Clipster, printed