Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-2X16
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2 mm |
Length (l1) | 16 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Saddle washer for trapezoidal profile
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3069
90° elbow, with solder connection and plug-in end EN1254, copper, 5001A
Taper-grooved dowel pin DIN 1472, A1 stainless steel, plain
Self-tapping screw
Hexagonal bolt with thread up to the head ISO 4017, A2-80 stainless steel, plain
Hexagonal bolt with shank DIN 601, steel 4.6, zinc-plated, blue passivated (A2K), with nut
Camshaft setting tool For Opel/BMW
Hammer drill bit Max Quadro-L Vario
Oval-head screws with H cross recess DIN 7985, steel 4.8, nickel-plated