Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-2X4
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2 mm |
Length (l1) | 4 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Central locking plate for screwing on
Protective glove, disposable
Twist drill bit, metal Ruko DIN 338 HSS-G TiN 130°
Compression cable lug DIN 46235
Safety boots S3
HSS-Co8 end mill, short, centre-cutting DIN 844K
Steel door split spindle 8 mm with M12 threaded roller
Hand tap, taper tap HSS DIN 2181
Crack detector system
Concealed slide full-extension slide Dynapro With integrated soft-close system