Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-2X8
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2 mm |
Length (l1) | 8 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Hexalobular screw with flattened half round head
Threaded fitting
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Insert
Wood screw, countersunk head DIN 97 Countersunk head, slotted
Grooved taper-pin ISO 8744 steel plain
Brake fluid DOT 4 Plus For hydraulic brake systems
Seal
TIPP® robust pipe clamp, hot-dip galvanised
Taper-grooved dowel pin ISO 8745 steel plain