Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-3X28
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 28 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Plastic end grommet For rigid electrical conduits
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
Impact socket
Thread mandrel
Article sticker
Plastic multi-purpose Zebra Shark® anchor without collar
Hexagonal bolt with shank
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Perforated sleeve WIT-SH WIT-SH for ALLROUNDER WIT-VM 250 injection systems
Reserve taper grooved dowel pin ISO 8741 steel plain