Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-5X16
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 16 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Fixanchor internal thread W-FAZ-IG/S - push-through installation
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Cover cap for profile rail
Hexagonal bolt with thread up to the head DIN 933, steel 12.9, plain
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
KALTSCHMELZ® device KSG-E For adhesive-free insertion of variably positionable plastic anchors into frameless lightweight panels
Work dungarees
Adhesive lubricant HHS® 200
Shoe accessories