Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-5X20
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 20 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Hose repair set, clip system
UV 50 sun protection spray
HPT extra-short twist drill bit DIN 1897
Liva Box desk substructure drawer
Push-in spigot hinge 3-piece
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Countersunk head screw
Insert, tapered sealing EN1254, red brass, 4381
Lock for HDPE service case