Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-6X12
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 6 mm |
Length (l1) | 12 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Tolerance class | 0 - not applicable |
Last viewed
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
MS 5000 locking hook Screw-on
W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Diamond Cup Wheel for Hard Material
pias® drilling screw, countersunk head with AW drive
Assembly wedge set
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Crimp cable lug, pin shape Polyamide insulated
Multi-use bandsaw blade
Cylindrical pins with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper)