Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-6X55
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
 | |
Nominal diameter (d1) | 6 mm |
Length (l1) | 55 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with shank and fine thread
Hard hat uvex pheos B WR
Breathing mask, disposable
Drilling jig For door handles and security door fittings with deadlock/CK punch
FLEXEN® cold rubber 2 m hose
Hexagon socket set screw with ring cutter
Engine bridge with universal support, universal
Threaded fitting
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
Divider assortment With compartment rails and compartment dividers for system dimensions 8.6
