Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-8X22
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 8 mm |
Length (l1) | 22 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
EPS profile double cylinder
Hexagon nut, low profile with fine thread DIN 439, steel, zinc-plated blue passivated (A2K)
HSCo 90° green-ring countersink DIN 335C
Hexagonal bolt with threading up to head
Hexagonal cap nut, high profile DIN 1587, brass, chrome-plated (F2J)
Slotted cylinder head screw ISO 1207, polyamide 6.6, natural
O-ring assortment For cargo vehicles 310 pieces
Drilling screw, flat head with AW drive and minipoint pias®
ISO insert holder with S clamping system for DC indexable inserts
Hexagonal bolt with flange in accordance with MBN standard