Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-8X28
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 8 mm |
Length (l1) | 28 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Low-cut safety shoes, S1
Disposable gloves Nitrile
System bolt With expanding socket for system connector SV 20 E
EASYLUX 12 V-4 control module
Low-cut safety shoes, S2
Tooth-form cutter HSS pressure angle 20°
Four-way T-distributor
Hexagon Socket Head Cap Screw with metric fine pitch thread ISO 12474/DIN 912, steel 12.9, plain
Lock washer DIN 127, steel, mechanically applied zinc coating
3D hinge dia. 16 mm