Clamping pin/clamping sleeve ISO 13337 spring steel plain
ISO 13337 steel plain
SPGPIN-ISO13337-8X30
Register now and access more than 125,000 products
Spring pins and clamping sleeves are able to transfer large shearing forces. In addition, spring pins and ISO 13337 clamping sleeves do not require any special installation conditions. An adjustment for the location bore is not absolutely necessary with clamping sleeves.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 8 mm |
Length (l1) | 30 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Lightweight series |
Standards | ISO 13337 |
Last viewed
Socket contact Micro Quadlok System (MQS) 0.63 Uninsulated
System insert, unprocessed foam
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with flange DIN 6921, steel 10.9, zinc-plated, blue passivated (A2K)
Oil filter wrench set 3 pieces, for Mazda
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
Fitting, tapered sealing EN1254, gunmetal, 3341
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Concealed hinge TIOMOS click-on 120
T-Shirt JN 1808