Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-12X20
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 12 mm |
Length (l1) | 20 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Cylindrical grooved pin with chamfer DIN 1473, A1 stainless steel, plain
House door mortise lock HT 28
Charger clamp Fully insulated, 750 A
Spacer washer
Façade construction screw Faba® type BZ with hexagon head and sealing washer
Safety boots, S3
Slotted cheese head DIN 84, brass, plain
Cetus work dungarees
ELMO® two-pole voltage tester DUO PLUS with FI/RCD trigger test
Work vest