Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
SPGPIN-ISO8752-ST-12X95
Art.-no. 047512 95
EAN 4052703465002
Register now and access more than 125,000 products
- Fastening elements, similar use to grooved pins.
- For use as a screw and bolt sleeve for high shear loads.
- Relieves load on bolts and screws, allowing smaller sizes to be used.
- An oversize of 0.2 to 0.5 mm relative to the nominal diameter ensures a secure, tight fit.
- Tapered end makes it easier to drive into the hole.
- The pins can be driven out again without damage.
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
Last viewed
Lock washer VS Spring steel, mechanically applied zinc coating
Nova Pro OrgaAer full-extension slide with integrated soft-close system
Post footer For posts resting against the façade
Low-cut safety shoes, S1P Uvex 1 G2 6837
Ceramic abrasive grain flap wheel
Manual drive-in stud with small collar
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Screw with flattened half round head with hexagon socket, imperial ASME B18.3, plain steel alloy, low head, UNC (comparable with ISO metric thread)
Copper manifold