Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-13X10
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 13 mm |
Length (l1) | 10 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Washer DIN 433, zinc-plated steel, blue passivated (A2K), for cylinder head screw
Connector, pneumatic
Ratchet combination wrench
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Screwless hose clamp low overall height
Identification rings, PVC
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
System workbench 1500 mm with 1 workbench foot and drawer undercounter cabinet 8.6
Drift punch According to DIN 6458
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032