Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-13X140
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 13 mm |
Length (l1) | 140 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
T-piece, with solder connection on all sides EN1254, copper, 5130
Perfect zinc spray
PRO plastic box set
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Neon high-visibility polo shirt class 2
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Turnbuckle sleeve, open form
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
EPS profile thumbturn cylinder