Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-13X16
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 13 mm |
Length (l1) | 16 mm |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Height of flat point | 2.4 mm |
Last viewed
System connector SV 20 E
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
PVC single core H05/H07V-K, fine wire
Mesh Sanding Disc for orbital disc sanders
Low-cut safety shoes, S2
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
SC end mill, long, optional, four blade, variable helix DIN 6527L, HB shank
Safety shoe Jalas 9965 Exalter
Work dungarees
Countersunk tapping screw type C with H recessed head ISO 7050, A2 stainless steel, plain