Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-14X12
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 14 mm |
Length (l1) | 12 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Article sticker
Door handle A 807 on oval escutcheon
Hexagonal bolt with shank DIN 931, A4-70 stainless steel, plain
Plastic multi-purpose anchor SHARK® Pro
Soldering tips set Ersa series 832/842
Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Bandsaw blade structural steel individual
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Welding bolt, shape PT ISO 13918, copper-plated steel 4.8, shape PT
Low-cut safety shoes, S2