Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-20X16
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 20 mm |
Length (l1) | 16 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Burnishing roller Klingspor NCW 600 S
Knitted protective glove with coating
Wall rail For cream and soap dispenser system
Filler VAKU 30
Drive arbor for HW hole saws (flat cut)
Engine adjustment setting pin
Hexagonal nut, low profile DIN 439, A2 stainless steel, plain, shape B
HSS Performance die For standard metric ISO thread
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
Oil filter wrench with 3/8" drive for BMW