Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-21X120
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 21 mm |
Length (l1) | 120 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Low-cut safety shoes, S1
OrgaAer partial extension
Heat-resistant crepe masking tape +120 °C
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-nickel-plated, black passivated with sealing (P3R)
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head