Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-2,5X14
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
 | |
Nominal diameter (d1) | 2.5 mm |
Length (l1) | 14 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Hazardous materials cabinet, type 90
TIPP® Smartlock GS ML pipe clamp
Display panel system, wall, one colour DIN A4
Solid carbide end mill Speedcut Inox, extra long XL, optional, four-lipped drill, uneven angle of twist gradient
Paint spray, high gloss
HSS Performance die For standard metric ISO thread
Threaded fitting
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Screw-on fastening base – countersunk head
