Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-25X26
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 25 mm |
Length (l1) | 26 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
SMP adhesive sealant METALLIC
Twist drill bit HSCo DIN 340 type RN OXIDE
Mixer nozzle for MAK 38 and EURABOND RC EXPRESS
FDT 533 tester For smoke switch
Tool retractor Martor 9960
EPS profile double cylinder
Cylindrical pin, hardened DIN 6325, steel, plain
Shoe accessories
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Connection sleeve nipple with external solder connection and female thread EN1254, gunmetal, 4246G