Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-25X65
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 25 mm |
Length (l1) | 65 mm |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Standards | ISO 8752 |
Last viewed
pias® drilling screw, flat head with AW drive
Short sanding belt Klingspor LS 309 XH
EPS profile double cylinder
Mechanic's glove Ansell HyFlex® 11-800
Work shorts
Tungsten carbide bur with STEEL teeth
Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
W-VD-A/F W-VD-A anchor rod hot-dip galvanised steel
Hexagonal nut, 1.5xd high DIN 6330, A2 stainless steel, plain