Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-28X120
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 28 mm |
Length (l1) | 120 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Clamping bolt for perforated table For quick-action clamps
Padlock 3KS PLUS
Slotted flat-head screw DIN 85, A4-70 stainless steel, plain
Cetus trousers with holster pockets
Bottom bracket latch for insect protection
Work trousers
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Work dungarees
Electrician's helmet SH-E 2000-S