Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-28X170
Art.-no.
047528 170
EAN 4049557430324
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
Notice
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Product information
Datasheets(X)
 | |
Nominal diameter (d1) | 28 mm |
Length (l1) | 170 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Fit bolt, hexagon head
Threaded fitting petrochemicals/offshore
1/4 inch socket wrench insert, metric short
Door closer GTS 640 G with sliding rail
Cetus work dungarees
Mounting block set
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot
Taper plug GPN 605 Silicone (SI), natural
Bolt with head
Shim ring DIN 988, steel, plain