Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-32X45
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 32 mm |
Length (l1) | 45 mm |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
HSCo green-ring machine tap for blind holes DIN 371/376
Safety boots, S2
Circlip DIN 472. Bronze CuSn6 plain, shape J
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Lamella flap disc Flexi-Disc
Drawer cabinet BASIC 700 S
VDE screwdriver set slotted/PZ recessed head 5 pieces
Labelling pocket, self-adhesive With two permanent adhesive strips on the back
Hexalobular-type cheese head screw, low head
Hexagon socket set screw with pin ISO 4028, A4 stainless steel, 21H, plain