Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-3,5X26
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 26 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Conical countersink HSS Ruko DIN 335 plain form C
Drawer divider set, BASIC, 18 compartments
Boom for flap and mobile scaffolding 75
EPDM sealing tape adhesive
Triang. outrigger f. flap a. mob. scaffolding 180
Connector, pneumatic
Ducting clamp Part 1 – Light series
Washer DIN 6340, steel, plain, for clamping device
Hand-held circular saw blade For cordless tools
Blanking grommet Made from neoprene