Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-35X80
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
 | |
Nominal diameter (d1) | 35 mm |
Length (l1) | 80 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
End cap set For REDOSLIDE Z60-HW/Z100-HW interior sliding door fitting
EPS profile double cylinder
180° double elbow, with solder connection on both sides EN1254, copper, 5060
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit, metal Ruko DIN 345 HSS-G plain/SO
TIPP® Smartlock GS pipe clamp
AL 900 door handle on outer plate With cylinder cover
System assortment 8.4.1, socket wrench 1/4 + 1/2 inch 108 pieces
