Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-38X55
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 38 mm |
Length (l1) | 55 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Sealing washer
Metal coils 4 mm With Powerglider
1/2 inch diamond wet core drill bit
Jacket Planam Highline
Rivet nut, multi-purpose, with countersunk head
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, plain
Countersunk head screw with recessed head, H ISO 7046-2, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Cordless impact wrench ASS 18 1/2 inch COMPACT M-CUBE
Reducer, polyamide, metric, hexagon