Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-4,5X5
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 4.5 mm |
Length (l1) | 5 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Trim panel For H84 Slidebox
S3 safety shoe Heckel Maccrossroad3.0 low Boa
2C cutter knife with slider
City softshell jacket
Clip cover For Z60-H/Z100-H sliding door fitting set
Low-cut safety shoes, S1
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Eye bolt with full thread DIN 444, A2 stainless steel, plain, shape LB
Tar remover