Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-50X22
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 50 mm |
Length (l1) | 22 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Cetus trousers with holster pockets
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Strapping clip, phosphated For Spannfix strapping system
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Grooved taper-pin ISO 8744 steel plain
Occupational shoes
Tubular rivet shape A
Hexagon nut
Removal adapter set R134a For 12 kg R134a reusable refrigerant bottles