Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X25
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 7 mm |
Length (l1) | 25 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752, DIN 1481 |
Last viewed
SNAP marker
Lock washer For cheese head screws DIN 7980, steel with mechanically applied zinc coating
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Stud with head, shape B
Hexagon nut
Work trousers
Oval-head screws with H cross recess DIN 7985, steel 4.8, nickel-plated
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Key rosette pair AL 30
Countersunk head screw