Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X28
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
RoHS-compliant | Yes |
Design | 0 - not applicable |
Last viewed
Subland stepped drill bit DIN 8374, RN-fine, 90°
Ducting clamp Part 2 – Heavy series
Single cantilever For the cantilever rack
Safety boots, S3
AMO mounting clip
Raised countersunk tapping screw, C shape with H recessed head
Hexagon Socket Head Cap Screw with low Head DIN 7984, A2-070 stainless steel, plain
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hook-and-loop sanding pad, hard For WSS 225-E wall and ceiling sanders